true key premium code how to expand a hard drive storage

My thinking here is: the hard drive and Cloud Key are going to need to share the same ground. Unlike with this project, which cuts off all the cables leading to the SATA power connector, I wanted to bring the power connector’s ground wires out alongside the SATA data cable and connect them to the hard drive power supply’s ground. Then connect it to a hard drive with its own power supply. The Cloud Key has a standard SATA connector inside, so it’s possible to use a SATA extension cable, mounted to a 3D-printed adapter on the Cloud Key’s hard drive tray, to bring the SATA connection outside.

I should note that this probably voids a Cloud Key’s warranty, but I’m sure whatever warranty I had on mine has long since expired. Unfortunately, I couldn’t find many other details on this modification hopefully this post rectifies that. I like this idea in addition to the ability to use cheaper, larger drives, I can use 7200 RPM NAS-grade drives, which should last a long time with this workload and be plenty fast. I did find a couple forum posts alluding to the possibility of hacking the Cloud Key to use a 3.5” drive, along with this 3D-printable mount for the Cloud Key alongside a 3.5” drive. (Heh, I wonder why.) The Cloud Key Gen 2+ page still advertises that it supports up to 5TB, but there’s no recommendation of what drives to use as an upgrade it also doesn’t seem to mention anywhere that you can only use drives that don’t require a 12V supply at all. When trying to figure out what hard drive to use as a replacement, I discovered that the support document listing recommended hard drive upgrades along with the Cloud Key’s peculiar hard drive power requirements has disappeared from Ubiquiti’s website. I can’t believe Ubiquiti recommends or supports this configuration.) (It’s also incredibly slow trying to browse through a video timeline while the Cloud Key used this drive was a hellish experience.

Mine died in October, after less than 9 months of use, and at that point I also discovered there was no warranty on that hard drive.

Unfortunately, that comes with trade-offs: the 5TB drive Ubiquiti recommended, a Seagate ST5000LM000, seems to be spectacularly unreliable with this workload and in this hot environment. In January 2021, I upgraded my Cloud Key to a 5TB hard drive, which is the maximum officially-supported capacity - likely because that’s practically the biggest 2.5” hard drive available. This post walks through my successful expansion of Ubiquiti’s Cloud Key Gen2+ to use a 3.5” hard drive instead of a 2.5” drive. Expanding the Ubiquiti Cloud Key Gen 2+ with a 3.5” Hard Drive November 04, 2021

True key premium code how to expand a hard drive storage